Welcome, Guest. Please login or register.

Login with username, password and session length

 
Advanced search

3818 Posts in 1183 Topics- by 2192 Members - Latest Member: mariodea

February 10, 2012, 04:36:46 PM
Maintenance IssuesTR4 RangeTanneau Cover question
« previous next »
Pages: [1]   Go Down
Print
Author Topic: Tanneau Cover question  (Read 500 times)
ksd
Newbie
*
Posts: 26
« on: April 04, 2010, 07:02:10 PM »
Gentlemen:
My 62 TR4 came with a tanneau cover that appears to be original equipment.
Mid way down the length of the zipper there is a strap that is about an inch wide and three feet long. This strap is rivited to the cover right next to the zipper and has a press the dot fastener on the free end. When the cover is installed with the passinger side covered and driver's side open this strap is hanging down aft of the shift lever about even with the driver's shoulder. Can't for the world figure out what it's for! It appears to be original to the cover and not some add on by a previous owner. Any ideas anyone? Thanks KSD
Logged
herald948
Global Moderator
Full Member
*
Posts: 148


VTR's 10 / Herald / Sports 6 (Vitesse) consultant


WWW
« Reply #1 on: April 04, 2010, 07:33:58 PM »
There should be a "stud" low on the tunnel side of the passenger seat. The strap snaps there to help tame the tonneau cover at speed.
Logged
Andrew (Andy) Mace, lifelong Triumph owner! Smiley Please check out the North American Triumph Sports 6 and Herald Database site at http://triumph-herald.us
Pages: [1]   Go Up
Print
« previous next »
Jump to:  

Theme orange-lt created by panic