Welcome, Guest. Please login or register.

Login with username, password and session length

 
Advanced search

3886 Posts in 1208 Topics- by 2247 Members - Latest Member: Steve Ahmann

May 23, 2012, 03:29:01 AM
Maintenance IssuesTR2 - TR3rubber molding at top of windscreen
« previous next »
Pages: [1]   Go Down
Print
Author Topic: rubber molding at top of windscreen  (Read 308 times)
ranger_blackhat
Newbie
*
Posts: 47


1954 TR-2
« on: February 09, 2012, 08:19:16 AM »
hello again, I have a new rubber molding for the top, already replaced the bottom which was relatively easy to figure out but tried and do not know how to approach the top channels.

I am sure many have done it and perhaps you can share your hints and tricks on getting it into and through the channel.

Marc
Logged
ranger_blackhat
Newbie
*
Posts: 47


1954 TR-2
« Reply #1 on: March 08, 2012, 10:26:49 AM »
I know that someone has done this....HELP
Logged
donbmw
Newbie
*
Posts: 12



WWW
« Reply #2 on: March 11, 2012, 06:01:16 PM »
I replaced mine when I had the windshield stanchons off of the frame. Have not looked to see if it could be replace when mounted to the body.

Don
Logged
Donald Woodward
ranger_blackhat
Newbie
*
Posts: 47


1954 TR-2
« Reply #3 on: March 14, 2012, 02:16:43 PM »
thanks Don, I had the stantions off as well and still never got the ruber slotted.
Logged
bobhustead
Jr. Member
**
Posts: 53
« Reply #4 on: May 10, 2012, 07:47:40 AM »
As I recall, I lubed my track and the spline lightly with Crisco and worked it in with alternating pulls at the end being inserted and pushes along the length of the standing part.
Bob Hustead
Logged
bobhustead
ranger_blackhat
Newbie
*
Posts: 47


1954 TR-2
« Reply #5 on: May 12, 2012, 02:32:49 PM »
Bob, thanks for the additional clues.  I should be back to the car in couple weeks and let you know how I progress.

Marc
Logged
Pages: [1]   Go Up
Print
« previous next »
Jump to:  

Theme orange-lt created by panic